WD-40 in the bathroom?! Did you know that the universal lubricant WD-40 can also be used in the bathroom? Although we usually associate it with bike maintenance or unlocking rusty locks, this miracle spray has much more potential. Below we've collected 10 tricks to make WD-40 your new ally in the fight against stubborn stains, limescale and more. Get ready for a surprise!
When most people think of WD-40, they think of a lubricant for rusty tools or a savior for stubborn locks. However, this little miracle in a can is much more than just a garage tool! WD-40 in the bathroom?! Have you ever thought that you could also use it in the bathroom? If you haven't already, prepare to be amazed. WD-40 can help remove limescale, clean showers, protect metal surfaces, and more. In the following, we reveal 10 tricks that will turn your bathroom into a place of impeccable cleanliness - and that without effort. Get your can of WD-40 ready, because you'll want to try these simple yet effective tips right away!
1. Descaling from taps
Limescale is a nightmare for almost every bathroom, as it likes to accumulate on metal surfaces, especially faucets. If your faucet glow is just a memory, it's time to reach for the WD-40. The procedure is simple: first, clean the surface of the faucet with a damp cloth to remove major dirt and dust. Then apply WD-40 directly to the faucet, especially where the limescale is visible. Leave on for 5 to 10 minutes. During this time, the spray will begin to break down the deposits. When the time is up, take a soft cloth or sponge and gently wipe the faucet. The scale will disappear and the faucet will shine again. Tip: if the deposits are very stubborn, you can repeat the process. This is how you use WD-40 in the bathroom!
2. Prevention of rust on metal surfaces
Due to the high humidity, bathrooms are an ideal place for rust to form, which can quickly destroy the beautiful appearance of metal elements such as shower rods, towel rails and hooks. WD-40 can easily prevent this problem. To protect against rust, apply it to a cloth and gently wipe metal surfaces. It is important to spread the spray evenly over the entire surface, as a thin layer will act as a protective film. Regular use of WD-40 will prevent moisture from penetrating the metal and causing rust. If you already notice the beginnings of rust on metal surfaces, you can also use the spray to remove brown spots. The process is the same as for limescale - spray, leave on and then gently wipe off.
3. Unclogging the shower head
Shower heads are a common source of frustration when water jets start to spray in all directions due to scale build-up. Instead of buying a new shower head, you can easily solve the problem with WD-40. First, unscrew the shower head and clean it thoroughly with water to remove larger particles of dirt. Then spray it with WD-40, paying particular attention to the small nozzles where the most scale tends to accumulate. Leave the spray on for about 10 minutes. When the time is up, take an old toothbrush and gently scrub the nozzles with it. Then rinse the shower head with water and screw it back on. The result? Strong and even water jet without changing the shower head.
4. Removing stubborn stains from ceramic tiles
Ceramic tiles in the bathroom are constantly exposed to water, soap and other products, which means that they quickly accumulate stubborn stains that are not easy to clean. WD-40 is a great solution for this problem as well. The process is simple: first, lightly wet the tiles to remove surface dirt. Next, spray WD-40 directly onto the stain or dirty grout. Leave it on for about 5 minutes. Prepare a soft sponge or brush and start gently scrubbing the surfaces. The spray will dissolve the dirt and you will be able to enjoy the shine of your tiles. Finally, rinse the tiles with water and wipe them dry.
@wd40_uk 5 WD-40 Life Hacks! 🪛 @shaynaalnwick #fyp #hacks #lifehacks #wd40 #doitwithwd40 #cleaningtiktok
5. Restoration of gloss on glass surfaces
The glass in the bathroom, especially in the shower cubicles, quickly loses its shine due to hard water deposits and soap residues. Instead of struggling with harsh chemicals that often leave marks, try WD-40. The process is simple: spray the spray on the glass surface and leave it on for 5 to 10 minutes. Then take a soft cloth and start wiping the glass in a circular motion. WD-40 will dissolve scale and soap residue, and the glass will shine like new again. Tip: for extra shine, you can polish the surface with a dry, clean cloth at the end.
6. Removing adhesive residues
Have you ever tried to remove stickers from a mirror or tiles and you were left with a sticky stain? WD-40 is your solution! Simply spray the spray directly onto the adhesive stain and let it work for a few minutes. Then take a soft cloth and gently wipe the surface. WD-40 will effectively break down the glue, which you will easily remove. The best thing about it is that it does not damage the surface, so it can also be used on more delicate materials such as mirrors or glass surfaces. You can also use it that way WD-40 in the bathroom!
7. Lubrication of door hinges
Does your bathroom door creak and annoy you every time you open or close it? WD-40 is the best-known solution for squeaky hinges. Simply apply the spray directly to the hinges and move the door a few times to distribute the spray evenly. The creaking will stop immediately and the door will open and close smoothly. For best results, wipe off excess liquid after a few minutes to prevent dripping.
8. Cleaning the fan in the bathroom
Bathroom fans are often covered with a layer of dust and dirt, which reduces their efficiency. WD-40 can help you with this task as well. First, turn off the fan and remove the protective mesh. Then put some WD-40 on the cloth and use it to wipe all the dirt and dust off the fan. WD-40 will remove the dirt and create a protective layer that will prevent the rapid accumulation of new dust.
9. Removing mold from joints
Joints between tiles are often a problem when mold starts to build up, especially in damp bathrooms. While WD-40 is not a substitute for specialized anti-mildew products, it is a great temporary solution. Spray the spray directly onto the grout, let it sit for a few minutes, then gently scrub the grout with a toothbrush. The mold will disappear and the joints will look clean again. This trick is great for quickly refreshing the look of the bathroom before guests visit.
10. Restoration of the appearance of acrylic tubs
If yours has acrylic tub small scratches or it has lost its shine, you can restore it with WD-40. Apply the spray directly to the tub and rinse gently with a soft cloth. WD-40 will fill in small scratches and restore the bathtub to a new shine. Be sure to rinse the tub well after use so that it is not slippery.
@craig2204 Wd 40 cleans everything #wd40 #carcleaning #focus #carsofttiktok #nofancyshit #scottishcarscene #irishcarscene #carvaleting
Conclusion
WD-40 is a real superhero in the bathroom, because you can use it to solve many problems, from stubborn stains to protecting metal surfaces. Using this multi-purpose spray is not only easy, but also extremely effective. With a few simple tricks, you can clean your bathroom quickly and efficiently, without the need for expensive chemicals or professional help. So, the next time you enter the bathroom with cleaning in mind, don't forget your new best friend – WD-40!
